Define corrections

If necessary, define corrections for a specific feed plan. This can be useful when, for example, the weather suddenly changes and as a result the cows eat more or less. When correcting the feed plan it will affect all cows that are fed according to that feed plan.

  1. Go to Settings > Feeding > Feed plans.

  2. Click on the feed plan for which you want to define the spreading.

  3. Go to the tab Correction.

  4. Fill in the correction:

  5. Select the type of correction:

    1. Absolute: Fill in the amount of feed (kg) that must be substracted from or added to the daily feed amount (per feed type). If less feed is needed, fill in the minus sign (-) followed by the amount. E.g. current daily feed amount is 4 kg and should be corrected to 3 kg: fill in -1 kg.

    2. Percentage: Fill in the percentage of feed (%) that must be substracted from or added to the daily feed amount (per feed type). If less feed is needed, fill in the minus sign (-) followed by the percentage. E.g. current daily feed amount is 4 kg and should be corrected to 3 kg: fill in -25%.

  6. Click OK.

    The corrections will be effective after the next feed start.